TEW Thermoplastic Equipment Wire (Tinned Copper) 600 Volts

 

Stranded or solid tinned copper conductors, colour coded PVC insulation, -30 C to 105 C, 600 Volts, CSA and UL approved.

Packaging: 1500m, 300m, & 150m Spools or Barrel Packs.

Applications:

XX - Refer to Insulation Colour Code Chart

Boat Engine & Accessory Wiring Colour Code

ECS
Catalogue
Number

Conductor

Wall Thickness

(inches)

Nominal
O.D.
(inches)
Total
Weight
(lbs/km)
AWG
Size
Stranding
TWT20SL-XX 20 Solid .030 .092 23
TWT18SL-XX 18 Solid .030 .103 30
TWT16SL-XX 16 Solid .030 .114 39
TWT14SL-XX 14 Solid .030 .127 59
TWT12SL-XX 12 Solid .030 .141 85
TWT10SL-XX 10 Solid .030 .162 131
TWT24ST-XX 24 7 .030 .079 17
TWT22ST-XX 22 7 .030 .090 20
TWT20ST-XX 20 10 .030 .098 23
TWT18ST-XX-07 18 7 .030 .110 30
TWT18ST-XX 18 16 .030 .108 30
TWT16ST-XX-7 16 7 .030 .127 43
TWT16ST-XX-19 16 19 .030 .119 43
TWT16ST-XX 16 26 .030 .122 43
TWT14ST-XX-7 14 7 .030 .139 60
TWT14ST-XX-19 14 19 .030 .139 60
TWT14ST-XX 14 41 .030 .137 60
TWT12ST-XX-7 12 7 .030 .154 89
TWT12ST-XX-19 12 19 .030 .150 89
TWT12ST-XX 12 65 .030 .159 89
TWT10ST-XX-7 10 7 .030 .179 135
TWT10ST-XX-19 10 19 .030 .173 135
TWT10ST-XX 10 104 .030 .183 135
TWT08ST-XX-7 8 7 .045 .241 223
TWT08ST-XX 8 133 .045 .271 240
TWT08ST-XX-165 8 165 .045 .271 240
TWT06ST-XX-7 6 7 .060 .337 383
TWT06ST-XX-19 6 19 .060 .337 383
TWT06ST-XX 6 133 .060 .337 383
TWT06ST-XX-165 6 165 .060 .337 383
TWT06ST-XX-266 6 266 .060 .337 383
TWT04ST-XX-19 4 19 .060 .406 571
TWT04ST-XX 4 133 .060 .406 571
TWT04ST-XX-165 4 165 .060 .406 571
TWT04ST-XX-413 4 413 .060 .406 571
TWT02ST-XX-19 2 19 .060 .462 827
TWT02-UL1283-XX 2 133 .060 .462 827
TWT02ST-XX 2 133 .060 .462 827
TWT02ST-XX-165 2 165 .060 .462 827
TWT02ST-XX-259 2 259 .060 .462 827
TWT02ST-XX-665 2 665 .060 .462 827
TWT01ST-XX-19 1 19 .080 .578 1135
TWT01ST-XX-133 1 133 .080 .578 1135
TWT01ST-XX 1 259 .080 .578 1135
TWT01ST-XX-836 1 836 .080 .578 1135
TWT001ST-XX-133 1/0 133 .080 .578 1427
TWT001ST-XX 1/0 1064 .080 .578 1427
TWT002ST-XX-19 2/0 19 .080 .640 1755
TWT002ST-XX-133 2/0 133 .080 .640 1755
TWT002ST-XX 2/0 1330 .080 .640 1755
TWT003ST-XX-19 3/0 19 .080 .678 2093
TWT003ST-XX-259 3/0 259 .080 .678 2093
TWT003ST-XX 3/0 1672 .080 .678 2093
TWT004ST-XX 4/0 19 .080 .758 2578
TWT004ST-XX-259 4/0 259 .080 .758 2578
TWT004ST-XX-2109 4/0 2109 .080 .758 2578

 

Applications:

For internal wiring of appliances, switch board panels, controls, electronic circuits and motors.

 

 

The following is from the American Boat and Yacht Council Standards (ABYC) and Recommended Practices.

TABLE XII - BOAT ENGINE AND ACCESSORY WIRING COLOR CODE

COLOR ITEM USE

Yellow w/red stripe
Starting circuit
Starting switch to solenoid

Brown/yellow stripe or Yellow - see note
Bilge blowers
Fuse or switch to blowers

Dark gray
Navigation lights
Tachometer
Fuse or switch to lights
Tachometer sender to gauge

Brown
Generator armature
Generator armature to regulator
Alternator charge light

Pumps Generator
Terminal/alternator
Auxiliary terminal to light to regulator
Fuse or switch to pumps

Orange
Accessory feed
Ammeter to alternator or generator output and accessory fuses or switches.
Distribution panel to accessory switch

Purple
Ignition
Ignition switch to coil and electrical instruments.
Instrument feed Distribution panel to electric instruments

Dark Blue
Cabin and instrument lights
Fuse or switch to lights

Light Blue
Oil pressure
Oil pressure sender to gauge

Tan
Water temperature
Water temperature sender to gauge

Pink
Fuel gauge
Fuel gauge sender to gauge

Green/stripe
(Except G/Y)
Tilt down and/or trim in
Tilt and/or trim circuits

Blue/stripe
Tilt up and/or trim out
Tilt and/or trim circuits


NOTE: If yellow is used for DC negative, blower must be brown with yellow stripe.